141
ADDITIONAL FEATURES CALL WAITING TONE PERIOD
CONFIGURING CALL HOLD REMINDER
Mitel Web UI
1. Click on Basic Settings > Preferences > General.
2. The Call Hold Reminder field is disabled by default. To enabled this field, check the box. When this
feature is enabled, the reminder ring splash timer starts as soon as you put a call on hold (even when
no other calls are active on the phone). The phone initiates a reminder ring splash periodically for the
single call on hold. When disabled, no reminder ring splash is audible.
3. Click Save Settings .
CALL WAITING TONE PERIOD
You can specify a specific time period (in seconds) for the call waiting tone to play at regular intervals on
an active call using the parameter Call Waiting Tone Period . A value of 0 is the default and plays the
call waiting tone only once on the active call. When the incoming caller hangs up, the call waiting tone
stops on the existing active call.
You can enable or disable this feature in the Mitel Web UI.
To Next Page
Loading...
