18
METHODS FOR CUSTOMIZING YOUR PHONE PHONE OPTIONS VIA THE IP PHONE UI
USING THE IP PHONE UI
1. Press the key on the phone to enter the Options List.
2. Press the navigation keys to view the different options.
3. Press the key, the right navigation Enter key, or press the number of the corresponding option to
select an option.
4. Change the selected option if required.
5. Press the key or the right navigation Set, or right Done key to save the change.
6. Press the key, the left navigation key, or the key at any time to exit without saving changes.
NOTE: For more information about customizing your phone using the available options from the IP
phone UI, see the section “Customizing Your Phone”. For more information about Administrator
options, contact your System Administrator.
2 Preferences
1. Tones
– Ring Tone
– Tone Set
2. Display
– Contrast Level
– Backlight
3 Phone Status
1. IP&MAC Addresses
2. LAN Port
3. PC Port
4. Firmware Info
5. Error Messages
6. Restart Phone
7. Copyright
4 Phone Lock
5 Diagnostics
6 Log Issue
OPTIONNUMBER OPTION
To Next Page
Loading...
