70
LINE KEYS AND PROGRAMMABLE KEYS SPEEDDIAL/XFER
CONFIGURING A CALL FORWARD
MITEL WEB UI
1. Click on Operation > Programmable Keys.
Programmable Keys
2. Select from Key 1 through Key 8.
3. In the Type field, select Call Fwd.
4. Click Save Settings.
SPEEDDIAL/XFER
The Speeddial key allows a number to be dialed quickly by pressing one key configured for speed dialing.
The Transfer key allows a call to be transferred to other recipients blindly or consultatively. The Speed-
dial/Xfer key combines the Speed dial and Transfer key's functionality together allowing the user to
transfer calls or use speed dial with one key.
NOTE: It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using the
Speeddial/Xfer feature. For more information about this parameter, see “Switch UI Focus to Ringing Line”.
SPEEDDIAL/XFER KEY REQUIREMENTS AND FUNCTIONALITY
The Speed Dial/Xfer key has the following capabilities:
• Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed Dial/Xfer key
causes the phone to go offhook and dial the predefined extension.
• Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speed
Dial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message Transfer Faileddisplays, and you can reconnect the call (get the
call back) by pressing the line key again.
To Next Page
Loading...
