146
ADDITIONAL FEATURES MESSAGE WAITING INDICATOR
MESSAGE WAITING INDICATOR
You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all lines. For
example, if you configure the MWI LED on Line 2 only, the LED illuminates if a voicemail is pending on
Line 2. If you configure the MWI LED for all lines, the LED illuminates if a voicemail is pending on any line
on the phone (lines 1 through 24).
You configure the MWI using the Mitel Web UI.
CONFIGURING MESSAGE WAITING INDICATOR
MITEL WEB UI
1. Click on Basic Settings > Preferences > General.
2. The Message Waiting Indicator Line field is set to all lines by default. If required, change the setting
to a specific line by selecting a line from the list. Valid values are All and lines 1 through 24.
3. Click Save Settings.
INCOMING INTERCOM CALL FEATURES
By default, the IP phone allows incoming intercom calls to be automatically answered without having to
set up an Icom key on your phone. The phone automatically plays a warning tone when it receives an
To Next Page
Loading...
