Mitel 6910 - Line Key; Configuring a Line Key Using the Mitel Web Ui; Creating a Speed Dial Key

54
LINE KEYS AND PROGRAMMABLE KEYS LINE KEY
LINE KEY
You can set a programmable key to act as a line/call appearance key on the 6910. For more information
about the behavior of Line keys, see "Line Keys and Programmable Keys".
CONFIGURING A LINE KEY USING THE MITEL WEB UI
1. Click on Operation > Programmable Keys.
Programmable Keys
2. Select from Key 1 through Key 8.
3. In the Type field, select Line to apply to the key.
4. In the Line field, select a line to apply to this key.
Valid values are 3 through 24.
5. Click Save Settings.
CREATING A SPEED DIAL KEY
The normal function of the speed dial option allows you to dial a number quickly by pressing a key config-
ured for speed dialing. You can program the keys on the 6910 to speed dial outside numbers, dial directly
to another person’s line or extension, or set it up to quickly access features such as Caller ID (*69) and
voicemail.
The speed dial function can be set using the IP phone UI or the Mitel Web UI.
NOTE: You can use a speed dial key while on an active call by placing the active call on hold first, and then
pressing the speed dial key.
You can create speed dial keys using any of the following methods:
• Using the Mitel Web UI at the paths:
– Operation > Programmable Keys