Mitel 6910 - Backlight; Live Dialpad; Enabling;Disabling Live Dialpad

31
CUSTOMIZING YOUR PHONE LIVE DIALPAD*
5. Use the navigation keys to increase or decrease the amount of contrast on the screen.
6. Press the key or 4 Select to save your selection.
BACKLIGHT
The Backlight option on the IP phone allows you to set the backlight status on the LCD display to the
following:
• Off: Backlight is always off.
• Auto (default): Automatically turns on the backlight when the phone is in use, and then automatically
turns off the backlight when the phone is idle after a specified length of time.
Configuring Backlight Options
IP PHONE UI
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Display.
4. Select Backlight.
5. Use the navigation keys to navigate to Off or Auto.
6. Press the key or select key Set to save your selection.
LIVE DIALPAD*
The Live Dialpad option on the IP phone turns the live dialpad mode on or off. With the live dialpad
feature enabled, the 6910 IP phone automatically dials out and turns on handsfree mode as soon as a
dialpad/keypad key or programmable key is pressed. With live dialpad disabled, if you dial a number while
the phone is on-hook, lifting the receiver or pressing the initiates a call to that number.
NOTE: Availability of this feature is dependent on your phone system or service provider.
You can enable/disable the live dialpad using the IP phone UI only.
ENABLING/DISABLING LIVE DIALPAD
IP PHONE UI
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Live Dialpad.
4. Use the navigation keys to navigate to ON or OFF.