© Copyright 2021, Mitel Networks Corporation. All Rights Reserved. 58016340 REV00
The trademarks, service marks, logos and graphics (collectively "Trademarks") appearing on Mitel's Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively "Mitel") or others.
Use of the Trademarks is prohibited without the express consent from Mitel. Please contact our legal department at legal@mitel.com for additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please refer to the website:
http://www.mitel.com/trademarks.
Mitel’s Power Over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S. patents (and any foreign patent counterparts thereto) identified at Mitel’s website: www.mitel.com/patents. For more information on the PD patents that are licensed,
please refer to www.cmspatents.com.
QUICK REFERENCE GUIDE
Mitel 6910 SIP Phone - Quick Reference Guide
Getting started
Goodbye
Voicemail
Speaker/Headset
Handset
Message Waiting Indicator
Status Bar
Phone Display
Context Sensitive
Softkeys
Transfer
Navigation
Settings
Volume Control
8 Programmable Paper-Labeled Keys
Select
Conference
Area
Call History
Contacts
Redial
Hold
Mute
Making a call
1. Lift the handset, and enter the number, OR
2. Press the key and at the dial tone, enter the number, OR
3. Press the Line key and at the dial tone, enter the number.
Ending or ignoring a call
Place the handset back in its cradle, or press the key.
Answering a call
1. Lift the handset, OR
2. Press the Line key and lift the handset, OR
3. Press the key for handsfree operation.
Redialing
1. To redial the last number that you manually dialed, pick up the handset (optional).
2. Press the key.
Muting or unmuting a call
1. Press the key while on an active call to mute the microphone for your
handset, headset, or speaker.
2. Press the key again to unmute the audio.
Holding and resuming a call
1. To place an active call on hold, press the key.
2. To resume the call, press the flashing key
To Next Page
Need help?
General
