Mito HQ EMF METER - Using the EMF Monitoring Software; Connecting the Meter and Device Search; Data Recording, Saving, and Viewing

EMF MeterManual (A6) V1.indd 18 2/14/18 1:41 PM
Using the Software
Connect the meter to a PC using the special mini-USB cable
supplied, and power ON.
• On your PC: Open the Mito Meter application. Make sure
the Meter is turned on, and that it is connected to the PC
via the supplied USB cable. Now ‘click’ the “Search device”
button. The software will locate the device, and, once
found, will show the device, along with the model name
and rmware version at the top of the application
window. Once connected, it is possible to start capturing
data.
• Press the “Start Recording” button to capture real-time
data from the device. The device updates readings twice
a second, using the peak value for that time segment.
• To stop the capture, press the “Stop Recording” button.
• Data may be saved to a le by pressing the “Save” button;
choose a location on your hard drive and press Save.
• Recorded data may be viewed by either: Pressing the
“Open” button and navigating to a saved le, or by
left-clicking in the graph area on the screen.