Pole Pruner Attachment
KICKBACK AND PINCHING SAFETY PRECAUTIONS
Beware of kickback!
• Kickback can occur whenever the tip of the guide bar touches an object while the saw is
operating. Kickback may force the bar up and back towards the operator with speed!
Beware of pinching.
• Pinching the saw along the tip of the guide bar may force the bar back rapidly toward
the operator. Pinching can occur whenever wood closes in around the moving chain.
• Both kickback and pinching may cause you to lose control of the pole pruner which
could result in serious personal injury.
• Understand kickback and pinching!
• Keep a rm grip on the pole pruner with both hands whenever the engine is running. A
rm grip will help you reduce the eects of kickback and pinching as well as maintain
control of the machine.
• Cut at high engine speeds.
• Follow the manufacturer’s instructions for sharpening and maintaining the chain.
• Use only genuine spare parts.
To Next Page
Loading...
