EasyManua.ls Logo

Mitox 271MT - Safety Precautions

Mitox 271MT
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
271MT / 281MT Multi-Tool
6
Original Instructions Version June13
Safety Precautions
Introduction
Read this Owner/Operator Manual carefully. Be sure you understand how to operate this Multi Tool properly
before you use it. Failure to do so could result in serious injury.
Keep this manual handy so that you may refer to it later whenever any questions arise. Also note that you are
able to contact the dealer from whom you purchased the product for assistance.
Always include this manual when selling, lending, or otherwise transferring the ownership of this product.
This product has been designed to be used as a Multi-Tool power tool as described previously and it should
never be used for any other purpose; doing so could result in unforeseen accidents and injuries occurring.
Only approved Mitox accessories should be used with this product.
This Multi-Tool is equipped with extremely sharp blades, always wear sturdy gloves when handling the
blades and t the safety guards when not in use.
When using this Multi-Tool for the rst time, take it to a wide, clear, open space, start the engine, and practice
handling the Multi-Tool until you are sure that you will be able to handle it properly in actual operation.
You should never use this Multi-Tool when under the inuence of alcohol, suering from exhaustion or lack
of sleep, suering from drowsiness as a result of having taken medicine, or at any other time when your
judgement might be impaired or that you might not be able to operate the Multi-Tool properly and in a safe
manner.
Never allow children or anyone unable to fully understand the directions given in this manual to use this
Multi-Tool.
When planning your work schedule, allow plenty of time to perform the work and allow plenty of time for
rest. Limit the amount of time you continuously use the Multi-Tool to 30~40 minutes per session and take
10~20 minutes of rest between work sessions. Also, try to keep the total amount of work performed in a
single day to 2 hours.
Never run the engine indoors as the exhaust gases contain harmful carbon monoxide.

Related product manuals