Brushcutter Gear Case
• Remove the bolt (a) on the gear case, top up the gearbox using Lithium grease and ret the
bolt.
Troubleshooting
Engine will not start, power loss:
• Check that the fuel tank is not empty. Fill with mixed fuel.
• The fuel does not reach the carburettor. Change the fuel lter in the fuel tank.
• There is water in the fuel. Drain and clean the fuel system.
• The air lter is dirty. Clean or replace the air lter.
• There are carbon deposits in the exhaust muer restricting the engine. Clean or change the
muer.
• Spark plug is worn. Replace spark plug.
(a)
To Next Page
Loading...
