Mitox 28MT - Component Location; Warnings in the Manual

28MT Multi-Tool
3
Original Instructions Version June 16
28MTa_160616
Warnings in the Manual
This mark indicates instructions which must be followed in order to prevent accidents which could
lead to serious bodily injury or death.
This mark indicates instructions which must be followed or it leads to mechanical failure,
breakdown, or damage.
This mark indicates hints or useful directions in the use of the product.
IMPORTANT
!
NOTE
Component Location
1. Fuel tank – 2 stroke mixture.
2. Engine starter/Recoil.
3. Carburettor / air filter.
4. Safety lever.
5. Throttle control lever.
6. Ignition switch.
7. Harness hanger.
8. Loop handle.
8A J-Handle.
9. Transmission shaft.
10. Attachment shaft.
11. Safety guard.
12. Gear box.
13. Nylon head.
14. Optional cutting blade.
15. Nylon Cutting blade.
16. Gear box.
17. Attachment shaft.
18. Rubber Grip.
19. Gear box.
20. Oil tank for lubrication.
21. Guide Bar.
22. Saw chain.
23. Extension Shaft (Optional)
24. Coupling.
25. Cutter Blades.