Never hold the Multi-Tool in a way in which the cutting head is pointing towards someone else.
Never allow the cutting head to come into contact with your body.
Always turn o the engine before adjusting the Multi-Tool, or at any time when coming into close
proximity with the cutting head.
Always wear thick work gloves when adjusting the Multi-Tool.
Safe Handling of Fuel
The engine of the Multi-Tool is designed to run on a two stroke oil/fuel mixture.
This fuel is highly flammable; never store cans of fuel or refill the fuel tank in any place where
there is a source of heat or fire, which might ignite the fuel.
Do not smoke whilst operating the Multi-Tool or refilling, keep lit cigarettes away from the Multi-
Tool at all times.
When refilling the fuel tank always stop the engine first and carefully make sure that there are no
sparks or naked flames anywhere nearby before refuelling.
If any fuel spillage occurs during refuelling, use a dry rag to wipe any fuel which has been spilled
onto the Multi-Tool before starting the engine.
After refuelling, screw the fuel cap back tightly onto the fuel tank and carry the Multi-Tool to a spot
5 metres or more away from where it was refuelled before starting the engine.
To Next Page
Loading...
