Operation
Keep clear of the cutter head as it may start moving when the engine starts.
Starting the Engine
CAUTION do not pull the starter cord all the way out and do not let go of the starter handle when
the cord is extended, this can damage the starter mechanism.
Cold Engine Starting
Rest the unit on a flat, firm surface. Keep the cutting head o the ground and clear of surrounding
objects as it may start moving when starting the engine.
Fig 4 - While holding the unit, pull out the
starter rope firmly until the engine fires
(indicated by a ‘cough’ from the engine).
Fig 3 - Set the ignition switch (d) to the
START (I) position.
Fig 2 - Move the choke lever (c) to the
START ( ) position.
Fig 1 - Push the air purge bulb (a) until
fuel is visible in the clear return fuel
line (b)
(a)
(b)
To Next Page
Loading...
