α
2 Simple Application Controllers
Function Blocks 6
6 - 31
10 )Select the appropriate FB output and press “OK using the “+” and “-” keys. After selecting
the appropriate function block, select the FB value to be used. The controller will return to
the “Setup FB” menu. ”
11 )Under the “Setup FB” menu, highlight “Channel” and press “OK.”
12 )Select “Channel 1” or “Channel 2” and press “OK”
13 )After setting up the function block, use the “ESC” key to return to the function block edit
screen.
Coun t lV
Coun t e r
a
Chann 1e
Channe l
B001 : AO
l
2
I npu t lV
Channe l
B001 : AO
a
To Next Page
Loading...
