What to do if Mitsubishi Electric Melsec A shows Error Code 102?
If your Mitsubishi Electric Controller displays Error Code 102, it means that data is being written to the read-only area (addresses 10 to 17). To resolve this, correct the program that is specifying the read-only area.
How to fix Mitsubishi Electric Melsec A Error Code 100?
If the Mitsubishi Electric Controller displays Error Code 100, this indicates that a number other than 1 to 3 has been set for the resolution setting. To fix this, correct the resolution setting.
What to do if Mitsubishi Electric Melsec A Controller shows Error Code 5 to 8?
If your Mitsubishi Electric Controller displays Error Code 5 to 8, it indicates that a value outside the range of 1 to 500 (times) has been set for the averaging count setting. Correct the setting to resolve this issue.
Why does my Mitsubishi Electric Melsec A show Error Code 0 to 4?
The Mitsubishi Electric Controller shows Error Code 0 to 4 because a value outside the range of 160 to 10000 (ms) has been set for the averaging time setting. Correct the setting to eliminate the error.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | Melsec A Series |
| Category | Controller |
| Language | English |
Explains network transition overview from MELSECNET (II) and /B to MELSECNET/H.
Details the migration to Q series for MELSECNET/H network systems.
Outlines the step-by-step procedure for transitioning to a Q series MELSECNET/H system.
Covers the replacement process of MELSECNET/10 with MELSECNET/H for Q Series.
Details the replacement of CC-Link for A/AnS/QnA/QnAS Series with Q Series.
Compares performance specifications between MELSECNET (II) and MELSECNET/H modules.
Details the performance differences between MELSECNET (II) and MELSECNET/H modules.
Contrasts the functional differences between MELSECNET (II) and MELSECNET/H systems.
Compares the network parameter settings between MELSECNET (II) and MELSECNET/H.
Details the differences in parameter settings between MELSECNET (II) and MELSECNET/H.
Compares program elements and instructions between MELSECNET (II) and MELSECNET/H.
Compares performance specifications for MELSECNET (II) and MELSECNET/H remote I/O modules.
Details the compatibility of module performance between MELSECNET (II) and MELSECNET/H.
Contrasts the functional differences between MELSECNET (II) and MELSECNET/H for remote I/O.
Compares parameter settings for MELSECNET (II) and MELSECNET/H master stations.
Details parameter differences between MELSECNET (II) and MELSECNET/H master stations.
Compares program elements for MELSECNET (II) and MELSECNET/H in remote I/O networks.
Compares performance specifications of MELSECNET/10 alternative models.
Details module performance comparisons, highlighting incompatible aspects.
Contrasts the functional differences between A/AnS series and Q series for PLC to PLC networks.
Compares parameter settings for control stations in MELSECNET/10 networks.
Explains how to replace MELSECNET/10 with MELSECNET/H for remote I/O networks.
To Next Page
