What to do if Mitsubishi Electric Melsec A shows Error Code 102?
If your Mitsubishi Electric Controller displays Error Code 102, it means that data is being written to the read-only area (addresses 10 to 17). To resolve this, correct the program that is specifying the read-only area.
How to fix Mitsubishi Electric Melsec A Error Code 100?
If the Mitsubishi Electric Controller displays Error Code 100, this indicates that a number other than 1 to 3 has been set for the resolution setting. To fix this, correct the resolution setting.
What to do if Mitsubishi Electric Melsec A Controller shows Error Code 5 to 8?
If your Mitsubishi Electric Controller displays Error Code 5 to 8, it indicates that a value outside the range of 1 to 500 (times) has been set for the averaging count setting. Correct the setting to resolve this issue.
Why does my Mitsubishi Electric Melsec A show Error Code 0 to 4?
The Mitsubishi Electric Controller shows Error Code 0 to 4 because a value outside the range of 160 to 10000 (ms) has been set for the averaging time setting. Correct the setting to eliminate the error.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | Melsec A Series |
| Category | Controller |
| Language | English |
To Next Page
