Mitsubishi Electric Melsec A Series - CHAPTER 5 REPLACEMENT OF THE MELSECNET;10 (REMOTE I;O NETWORK); 5.1 Replacing MELSECNET;10 with MELSECNET;H

9. TROUBLESHOOTING
I
9.2.6
Flow chart used when "ERROR" LED of the A2CCPU flickers
"Error" LED flickers.
Other than 0
o
•
•
Consult the sales representative with details.
Reset the coil of the annunciator which
is ON with the RST F[ 1instruction.
Completed
9-8