Mitsubishi Electric Melsec A Series - Fixing a DIN Adapter to a Module

5. MEMORY ICs BATTERY, CABLES AND DIN ADAPTER
-------------------- MELSEC-A
5.4.3 Fixing a DIN adapter to a module
I
(1) A2CCPU, A2CCPUP21/R21 and special function modules
Fix a DIN adapter to an A2CCPU, A2CCPUP21/R21 or special function
modules with M4 x 10 screws (attached to the DIN rail) (10 to 14 mm
(0.39 to 0.55 in) long).
Tightening torque should be 8 to 12 kg.cm. (6.93 to 10.4 Ib-in)
A2CCPU
or special function module
Mounting screw
(M4 x 10)
---~
DIN rail adapter
A6DIN-2C : A2CCPU
Special function module
A6DIN-3C : A2CCPUP21/R21
(2) A2C I/O module
•
Fix a DIN adapter to an A2C I/O module or a power supply module
(A66PC) with 2 M4 screws (10 to 14 mm (0.39 to 0.55 in) long).
Tightening torque should be 8 to 12 kg.cm. (6.93 to 10.4 Ib-in)
DIN adapter (A6DIN-1C)
/
Mounting
screw (M4)
-- /
"kii
A2C I/O module
5-9