5.
MEMORY
ICs BATTERY, CABLES AND DIN ADAPTER
--------------------
MELSEC-A
5.4.4 Mounting to the DIN rail
(1) Mounting procedure
After fixing
the
DIN adapterto the module, mount
the
module to the DIN
rail as follows :
(a) Engage
the
hook of
the
adapter
with
the
rail from above
the
rail.
(b) Push the module onto
the
rail and fix it in position.
I
DIN rail
adapter hook
DIN adapler
---1-\
J
DIN rail
A module mounted to DIN rail
(c) When two adapters with module are mounted to
the
rail side by side
without
leaving
a
clearance
between
them, a 4 mm
(0.16
in)
clearance is allowed between
the
modules. (See Appendix 1, Ex-
..
ternal Dimensions
for
dimensions of the DIN adapter.) ,
(2) Removing procedure
Remove
the
module from the DIN rail as follows.
(a) Pull down
the
bottom hook of
the
adapter using a flat blade flat
blade screwdriver.
(b) Pull the module away from
the
rail while pulling
down
the
bottom
hook.
Module
•
DIN
adapler
Flat blade screwdriver
5-10
To Next Page
Loading...
