Mitsubishi Electric Melsec A Series - Peripheral Devices

2. SYSTEM CONFIGURATION
------------------- MELSEC-A
2.3.2 Peripheral devices
Table 2.2 LIst of PerIpheral Devices
Unit Description Type
Remarks
• Consists of the following models:
Type Remark •
• Programming
unit with CRT
A6GPPE
• Equipped with ROM writer, FOD and printer
interface functions.
Intelligent A6GPPE-
GPP
SET
*1
SW[ jGP-GPPAEE A series system disk
Programming
unit with CRT
SW[ jGP·GPPKEE K series system disk
SWO-GPPU User disk (3.5 inch, formatted)
AC30R4
Cable for connection of CPU and A6GPPE
3 m/9.84 It length
Composite
Cable for connection of GPP and expanded monitor display. 1 m/3.28
video AC10MD
cable
It length.
• Consists of the following models:
Type Remarks
• Programming unit with LCD
A6HGPE
• Equipped with FDD, printer Interface and
Programming
Hendy
A6HGPE·
memory card interface functions.
unit with LCD
graphic
SET
*2
SW[ IGP-HGPAEE A series system disk
programmer
SW[ jGP-HGPKEE K series system disk
SWO-GPPU User disk (3.5 inch, formatted)
AC30R4
Cable for connection of CPU and A6HGPE
3 m/9.84 It length
• Consists of the following models:
Type Remarks
• Programming unit with plasma display
A6PHPE
• Equipped with FOD, printer interface and
Programming
Plasma
memory card interface functions.
unit with A6PHPE-
plasma
hendy
SET *3
SW[ IGP-HGPAEE A series system disk
display
programmer
SW[ IGP-HGPKEE K series system disk
SWO-GPPU User disk (3.5 inch, formatted)
AC30R4
Cable for connection of CPU and A6PHPE
3 m/9.84 It length
2-15
I
•
•