EasyManua.ls Logo

Mitsubishi Electric AE-200E - User Manual

Mitsubishi Electric AE-200E
192 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Contents
Chapter 1. General descriptions .............................................5
1. Before use ..................................................................................5
2. Setting the Operating Environment .......................................... 11
3. Logging in to the Integrated Centralized Control Web .............17
4. Name Display ...........................................................................20
Chapter 2. For building managers ........................................22
1. Home screen ............................................................................22
2. Usage .......................................................................................25
Chapter 3. For tenant managers ........................................105
1. Usage .....................................................................................107
Chapter 4. For general users .............................................. 148
1. Usage (PC, tablet) ..................................................................150
2. Usage (Smartphone) ..............................................................166
Chapter 5. Troubleshooting ................................................176
Before using the controller, please read this Instruction Book carefully to ensure proper operation.
Retain this manual for future reference.
Instruction Book
–Integrated Centralized Control Web–
Air Conditioning Control System
Centralized Controller
AE-200A/AE-50A/EW-50A
AE-200E/AE-50E/EW-50E

Table of Contents

Other manuals for Mitsubishi Electric AE-200E

Preview: Service Handbook
Service Handbook108 pages
Preview: Installation Manual
Installation Manual40 pages

Questions and Answers

  • W
    William FloresJul 25, 2025
    How to fix a version combination error on a Mitsubishi Electric Air Conditioner?
    • T
      Tracy CarneyJul 25, 2025
      A version combination error on your Mitsubishi Electric Air Conditioner occurs because the apportioned electricity billing function of the AE-200 has been enabled, but the AE-50/EW-50 is a version that is not supported (version earlier than 7.23) by the apportioned electricity billing function. To resolve this, update the AE-50/EW-50 to Ver.7.23 or later. The equipment recovers from the error and then data collection resumes after a maximum of 30 minutes elapse. For how to update the software, refer to "VIII [1] AE-200/AE-50/EW-50 update procedure."
  • B
    Bryan GreenJul 29, 2025
    What to do if the Mitsubishi Electric Air Conditioner shows a “Charge” license not registered?
    • M
      Matthew JacksonJul 30, 2025
      If the Mitsubishi Electric Air Conditioner displays a 'Charge' license not registered error, it means that with the apportioned electricity billing function of the AE-200, the “Charge” license needs to be registered to all the AE-50/EW-50 under the control of the AE-200, but there is equipment to which it is not registered. To resolve this, register the “Charge” license to all the AE-50/EW-50 under the control of the AE-200.
  • J
    Julie NorrisAug 3, 2025
    Why does my Mitsubishi Electric Air Conditioner display a system configuration change warning?
    • J
      Jon HoltAug 3, 2025
      The Mitsubishi Electric Air Conditioner shows a system configuration change warning because the AE-200 and AE-50/EW-50 back up each other’s data with the apportioned electricity billing function of the AE-200, but the backup data no longer matches after the AE-200/AE-50/EW-50 was replaced. To fix this, perform an apportioned data restore for the new AE-200/AE-50/EW-50. Note that the equipment recovers from the error and then data collection resumes after a maximum of 30 minutes elapse. For how to restore apportioned data, refer to AE-200 Instruction Book (Apportioned Electricity Billing Function).
  • J
    Jeremy CoxAug 7, 2025
    What to do if 'Failed to connect to AE controllers' appears on Mitsubishi Electric Control Systems?
    • J
      Jeffery RiosAug 7, 2025
      If the message 'Failed to connect to AE controllers' appears when accessing the Mitsubishi Electric Control Systems Integrated Centralized Control Web and no login window appears, it could be due to a few reasons: there might be a communication error with the login destination centralized controller, more than 50 users might be accessing the web interface, or the login destination centralized controller is still starting up. To resolve this, first, check the LAN connection. If that's not the issue, reduce the number of users accessing the Integrated Centralized Control Web to 50 or less. If the problem persists, wait for approximately 5 minutes to allow the startup process to complete before attempting to access the web interface again.
  • T
    Tricia HullAug 11, 2025
    Why are air conditioning units not displayed on Mitsubishi Electric AE-200E Control Systems?
    • J
      Jacob MorrisAug 11, 2025
      If the air conditioning units that can be monitored and operated are not displayed in your Mitsubishi Electric Control Systems, it could be due to a communication error with the AE-200/AE-50/EW-50 or incorrect integrated centralized control settings. First, check that the LAN connection is correctly connected. Then, use the Initial Setting Tool to monitor the settings and ensure that the centralized controllers are correctly set for control.
  • D
    Darren PetersenAug 16, 2025
    How to fix broken layout in Mitsubishi Electric Control Systems?
    • A
      alice76Aug 16, 2025
      If the layout in Integrated Centralized Control Web is broken or the buttons do not work on your Mitsubishi Electric Control Systems, it might be because the software version of AE-200/AE-50/EW-50 was updated, or the settings were changed using the Initial Setting Tool. To fix this, delete the history of the browser you are using.
  • W
    wsmithAug 20, 2025
    What to do if login screen does not open for Mitsubishi Electric Control Systems?
    • J
      Jennifer ZamoraAug 20, 2025
      If the login screen does not open for your Mitsubishi Electric Control Systems, it might be because the URL entered in the browser is incorrect. Check that the IP address of the AE-200/EW-50, which is the login destination for Integrated Centralized Control Web, is correct. Also, verify the setting using the Initial Setting Tool.

Mitsubishi Electric AE-200E Specifications

General IconGeneral
BrandMitsubishi Electric
ModelAE-200E
CategoryControl Systems
LanguageEnglish

Related product manuals