Why is my Mitsubishi Electric MDS-E showing overvoltage?
The overvoltage error in Mitsubishi Electric Control Systems occurs because the bus voltage in the main circuit has exceeded the allowable value.
Why does my Mitsubishi Electric MDS-E Control Systems have excessive speed error?
Excessive speed error in Mitsubishi Electric Control Systems means that the difference between the actual speed and the command speed continued for longer than the excessive speed deviation timer setting.
What causes Mitsubishi Electric Control Systems to show grounding error?
A grounding error in Mitsubishi Electric Control Systems indicates that the motor power cable is in contact with FG (Frame Ground).
What causes initial magnetic pole position detection error in Mitsubishi Electric MDS-E Control Systems?
The initial magnetic pole position detection error in Mitsubishi Electric Control Systems occurs when the servo ON has been set before the magnetic pole shift amount is set in the built-in motor which uses the absolute position encoder.
What causes a Mitsubishi Electric MDS-E NC-DRV communication CRC error?
An NC-DRV communication CRC error in Mitsubishi Electric Control Systems means that the data received from the NC was outside the setting range.
What does Mitsubishi Electric MDS-E Control Systems memory error 1 mean?
Memory error 1 in Mitsubishi Electric Control Systems indicates that a hardware error was detected during the power ON self-check.
What does axis selection error mean in Mitsubishi Electric Control Systems?
An axis selection error in Mitsubishi Electric Control Systems means that the axis selection rotary switch has been incorrectly set.
General| Category | Control Systems |
|---|---|
| Series | MDS-E Series |
| Position Control | Yes |
| Speed Control | Yes |
| Torque Control | Yes |
| Protection Class | IP20 |
| Number of Axes | 1 |
| Communication Interface | RS-485 |
| Programming Language | Not applicable (parameter setting via software) |
| Display | LED Display |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -20°C to 65°C |
To Next Page