60
To check the information about the units whose maintenance signs are
turned on
1. Touch the 3 [Maintenance Sign] tab, and check the number of units whose maintenance signs are
turned on, the names of the groups they belong to, and their addresses.
• When a lter sign appears, clean, wash, or replace the lter as necessary.
Refer to air conditioner or LOSSNAY manual for details.
• When appears on the Reset button, the button will not be available.
To reset the maintenance sign (for example, after cleaning the filter)
4 Reset button ：Clears the specific maintenance sign.
5 All Reset button： Clears all filter signs.
(This button is not available for the Air To Water (PWFY) groups.)
3
5
Number of maintenance signs detected
Displays the number of maintenance signs
that have been detected.
4
Usage - Main Menu Settings
System Management (cont'd)
To Next Page
Loading...
Need help?
General
