What to do if button operation is not working on Mitsubishi Electric DX-TL2500E?
If button operation is not working on your Mitsubishi Electric Recording Equipment, check if the POWER button is flashing, as the unit cannot be operated when the POWER button is flashing. Also, verify if the LOCK indicator light is on.
How to troubleshoot Mitsubishi Electric DX-TL2500E that will not turn on?
If your Mitsubishi Electric Recording Equipment unit will not turn on, check the following: Ensure the power cord is properly plugged in, check if the LOCK indicator light is on, verify if the TIMER indicator light is on, and confirm that the MAIN switch on the rear is not set to “OFF”.
What to do if Mitsubishi Electric DX-TL2500E has power but will not operate?
If your Mitsubishi Electric Recording Equipment has power but won't operate, check if the LOCK indicator light is on. Also, see if the POWER button is blinking, as the unit cannot be operated when the POWER button is flashing. If neither of these are the issue, the safety features might be active, try restarting the unit by pressing the RESET button on the back using a ballpoint pen or similar object.
Why won't my Mitsubishi Electric Recording Equipment perform playback?
If your Mitsubishi Electric Recording Equipment is not performing playback, first check if the LOCK indicator light is on. Then, verify whether the image data has been erased. Finally, ensure that the correct playback device is selected.
How to stop Mitsubishi Electric Recording Equipment from recording?
If your Mitsubishi Electric Recording Equipment is not stopping recording, check if the LOCK indicator light is on. During normal, alarm, and emergency recording, press the REC/STOP button for more than 1 second. If timer recording is in progress, press the TIMER button again for more than 1 second to stop it.
What to do if images are not appearing on the monitor connected to Mitsubishi Electric Recording Equipment?
To resolve the issue of images not appearing on the monitor with your Mitsubishi Electric Recording Equipment, ensure that the monitor and camera(s) are correctly connected. Also, verify that the unit is receiving an input signal from the selected camera by setting the unit to SPLIT16.
Why Mitsubishi Electric DX-TL2500E will not start recording?
To troubleshoot why your Mitsubishi Electric Recording Equipment will not start recording, ensure that the “HDD REPEAT REC MAIN” is not set to “OFF” or “STANDBY”, and that “HDD REPEAT REC SUB” or “HDD REPEAT REC LPA” are not set to “OFF”. Also, consider that the unit begins recording only after the specified recording time and check if the unit was stopped during the specified recording time.
Why Mitsubishi Electric DX-TL2500E will not perform Timer Recording?
To troubleshoot why your Mitsubishi Electric Recording Equipment will not perform Timer Recording, ensure that the date and current time are set accurately, the Recording Start-/End-times and the recording interval are set correctly. Also, check that the “HDD REPEAT REC MAIN” is not set to “OFF” or “STANDBY” and “HDD REPEAT REC SUB” or “HDD REPEAT REC LPA” is not set to “OFF”. Verify that the “A-PPS” in the is not set as “- - - - - -”, and confirm that the SUB HDD recordable capacity is not full.
How to enable Repeat Recording on Mitsubishi Electric DX-TL2500E Recording Equipment?
To ensure your Mitsubishi Electric Recording Equipment performs Repeat Recording, verify that the “HDD REPEAT REC MAIN”, “HDD REPEAT REC SUB”, and “HDD REPEAT REC LPA” are set to “ON”.
How to improve the monitor picture quality on Mitsubishi Electric DX-TL2500E Recording Equipment?
If the quality of the monitor picture is poor on your Mitsubishi Electric Recording Equipment, check if the connecting cord is connected correctly and ensure the camera’s focus is adjusted correctly.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | DX-TL2500E |
| Category | Recording Equipment |
| Language | English |
To Next Page
