FX
3S
/FX
3G
/FX
3GC
/FX
3U
/FX
3UC
PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
2 Specifications
2.5 Output Specifications
B - 38
2. Source internal output circuit
*1. To ground the unit, refer to the servo amplifier (drive unit) manual. If the grounding method is not
specified, carry out class-D grounding.
*2. For MELSERVO Series amplifiers, use a sink output type FX
3UC Series main unit .
Y0
Y4
FX3UC- MT/DSS
Main unit
Grounding
*1
Servo amplifier
*2
(Drive unit)
Pulse train signal
Direction signal
5 to 24V DC
+V0
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
