Mitsubishi Electric FX5-ENET - Page 60

58
9 TROUBLESHOOTING
9.6 List of Error Codes
2DA3H Parameter error A parameter error in external device
configuration was detected.
Reexamine and correct the setting of the protocol in external
device configuration in the FX5-ENET module parameters.
2DA4H Parameter error A parameter error in external device
configuration was detected.
Reexamine and correct the setting of the model name in
external device configuration in the FX5-ENET module
parameters.
2DA5H Parameter error A parameter error in external device
configuration was detected.
Reexamine and correct the setting of the fixed buffer
transmission in external device configuration in the FX5-ENET
module parameters.
2DA6H Parameter error A parameter error in external device
configuration was detected.
Reexamine and correct the setting of the IP address in external
device configuration in the FX5-ENET module parameters.
2DA7H Parameter error A parameter error in external device
configuration was detected.
Reexamine and correct the setting of the IP address (IPv6) in
external device configuration in the FX5-ENET module
parameters.
2DA8H Parameter error A parameter error in external device
configuration was detected.
Reexamine and correct the setting of the existence confirmation
in external device configuration in the FX5-ENET module
parameters.
2DA9H to
2DAAH
Parameter error A parameter error in external device
configuration was detected.
Check the setting of External device configuration in the FX5-
ENET module parameters.
2DB0H Request data error Request and setting data error Check the content of the specified request data.
3030H Hardware error Hardware error Please consult your local Mitsubishi representative.
3050H Socket communication fails Socket communication send message has
failed.
• Check the operation of the external device.
• Check if the connection cable is disconnected.
3052H Link-down A link-down has occurred due to
disconnection of the network cable connected
to an external device.
• Check the operation of the external device.
• Check if the connection cable is disconnected.
3053H Timeout A time-out has occurred in keep-alive mode. • Check the operation of the external device.
• Check if the connection cable is disconnected.
3055H Socket communication
receive fails
Socket communication send message has
failed.
• Check the operation of the external device or switching hub.
• Since there may be congestion of packets on the line, send
data after a certain period of time.
• Check if the connection cable is disconnected.
• Check that there is no connection failure with the switching
hub.
3056H Socket communication buffer
full
The socket communication buffer for
receiving has no space.
Read out the received data using the dedicated instruction.
3060H Parameter error The total number of connection is outside the
range.
Please consult your local Mitsubishi representative.
3061H Parameter error The station number is outside the range. Please consult your local Mitsubishi representative.
3062H Parameter error The number of stations occupied is outside
the range.
Please consult your local Mitsubishi representative.
3063H Parameter error The reserved station specification is outside
the range.
Please consult your local Mitsubishi representative.
3064H Parameter error The IP address form is outside the range. Please consult your local Mitsubishi representative.
3065H Parameter error The group number is outside the range. Please consult your local Mitsubishi representative.
3066H Parameter error The IP address is outside the range. Please consult your local Mitsubishi representative.
3067H Parameter error The total number of group is outside the
range.
Please consult your local Mitsubishi representative.
3068H Parameter error The group number is outside the range. Please consult your local Mitsubishi representative.
306AH Parameter error The constant link scan setting is outside the
range.
P
lease consult your local Mitsubishi representative.
306BH Parameter error The timeout time to disconnection detection is
outside the range.
Please consult your local Mitsubishi representative.
306CH Parameter error The consecutive number of time outs to
disconnection detection is outside the range.
Please consult your local Mitsubishi representative.
306DH Parameter error The IP address form is outside the range. Please consult your local Mitsubishi representative.
306EH Parameter error The IP address (IPv4) is outside the range. Please consult your local Mitsubishi representative.
306FH Parameter error The subnet mask is outside the range. Please consult your local Mitsubishi representative.
3073H Parameter error The gateway address (IPv4) is outside the
range.
Please consult your local Mitsubishi representative.
3074H Parameter error The subnet mask is outside the range. Please consult your local Mitsubishi representative.
Error
code
Error name Error details and causes Action