Why does my Mitsubishi Electric FX5-ENET have a minor error?
A minor error in the Mitsubishi Electric Controller, resulting from improper or inconsistent configuration, will not stop the module from operating.
General| Model | FX5-ENET |
|---|---|
| Type | Ethernet Communication Module |
| Series | FX5 |
| Number of ports | 1 |
| Connector type | RJ45 |
| Network Speed | 10/100 Mbps |
| Communication Protocol | Ethernet |
Indicates hazardous conditions resulting in death or severe injury.
Indicates hazardous conditions resulting in minor injury or property damage.
Precautions for system design to ensure safe operation.
Information on the intended use and limitations of the product.
Description of the CC-Link IE Field Network Basic.
Description of general-purpose Ethernet communication.
General specifications for the FX5-ENET module.
Details on the power supply requirements for the module.
Performance characteristics of the FX5-ENET module.
Identification of the physical parts of the FX5-ENET module.
Steps before operating the CC-Link IE Field Network Basic.
Steps before operating general-purpose Ethernet communication.
List of functions for CC-Link IE Field Network Basic.
List of functions for general-purpose Ethernet communication.
Other functions available on the FX5-ENET module.
How to configure the CC-Link IE Field Network Basic system.
Details on link points for CC-Link IE Field Network Basic.
How to configure general-purpose Ethernet communication.
Grounding procedures for the FX5-ENET module.
Instructions for connecting and disconnecting Ethernet cables.
Details on cables and hubs required for networking.
Steps to set parameters for the FX5-ENET module.
Setting the operation mode of the FX5-ENET module.
Setting IP addresses and basic functions of the FX5-ENET.
Setting parameters for general-purpose Ethernet functions.
Examples of interlock programs for cyclic transmission.
Troubleshooting using the RUN and ERROR LEDs.
Methods to check the status of the FX5-ENET module.
Confirming the status of CC-Link IE Field Network Basic.
Performing a test related to the hardware of the FX5-ENET.
Troubleshooting measures for common symptoms.
List of error codes for data communication and requests.
List of events that occur in the FX5-ENET.
Describes the external dimensions of the FX5-ENET.
Information on UL, cUL, and EC Directives compliance.
Explanation of the structure and usage of module labels.
Details of buffer memory addresses used for data exchange.
Describes the time components for CC-Link IE Field Network Basic.
To Next Page