2 - 6
SYSTEM CONFIGURATION2.
(2) Utility package
(a) None of the following utility packages for A6GPP/A6PHP can be used:
•SW -AD57P
*
The packages marked with * can
execute the same functions using the
dedicated instructions.
For details, refer to type AnSHCPU/
AnACPU/AnUCPU/QCPU-A (A Mode)
Programming Manual (Dedicated
Instructions).
• SW -UTLP-FN0
• SW -UTLP-FN1
*
•SW -UTLP-PID
•SW -SIMA
• SW -UTLP-FD1
•SW -SAPA
POINT
(1) The utility package, which specifies the device and accesses the QCPU-A,
can be used only in the device range for the A3ACPU, A3HCPU equivalent.
(Refer to Section 2.2.3.)
(2) Use an AnU-compatible utility package to use the device range for the
QCPU-A.
(Example: SW1IVD-SAP2, etc.)
To Next Page
Loading...
