To Next Page
T
tbennettAug 9, 2025
What to do if Mitsubishi Electric MELDAS 60S Control Systems shows BATALM?
- BBeverly NunezAug 9, 2025
If your Mitsubishi Electric Control Systems unit displays a BATALM error, the recommended solution is to replace the battery.
What to do if Mitsubishi Electric MELDAS 60S Control Systems shows BATALM?
If your Mitsubishi Electric Control Systems unit displays a BATALM error, the recommended solution is to replace the battery.
What to do if Mitsubishi Electric MELDAS 60S shows PSEMG?
If your Mitsubishi Electric Control Systems unit displays a PSEMG error, you should check the cause of the emergency stop.
How to troubleshoot DCIN error on Mitsubishi Electric Control Systems?
If your Mitsubishi Electric Control Systems unit displays a DCIN error, you should check the 24VDC voltage.
What to do if Mitsubishi Electric MELDAS 60S Control Systems shows DCOUT?
If your Mitsubishi Electric Control Systems unit displays a DCOUT error, you should replace the power supply or control unit.
General| Series | MELDAS 60S |
|---|---|
| Controlled Axes | Up to 8 axes |
| Programming Language | G-code |
| Display | LCD |
| Input/Output | Digital I/O |
| Operating Temperature | 0-45°C |
| Storage Temperature | -20-60°C |
| Type | CNC |
| Spindle Control | Digital |
| Communication Interface | RS-232C |
| Power Supply | AC 200-240V |
| Interpolation | Linear, Circular |
| Program Storage | Flash Memory |
