Mitsubishi Electric MELSEC iQ-F Series - Page 38

36
6 CREATING PROGRAMS
6.3 Program Example
Automatic angle advance function setting program
In the program example, set the following items.
• Set i_uCh (Channel number) to 1.
• Set i_uCamNo (Cam output number) to 0.
• Set the automatic angle advance.
• In this program example, set i_bAngleAdvFuncClear (Angle advance function clear) to off not to clear the angle advance
function setting.
1. Set the angle advance function selection to the automatic angle advance, and the angle advance function clear to off.