6 CREATING PROGRAMS
6.3 Program Example
37
6
2. Set the setting data of the automatic angle advance or individual automatic angle advance in i_u21AngleAdvFuncSet
(Angle advance function setting).
• Set the angle advance function setting data. The following shows an example for setting control using the following STEPs.
STEP0 Speed = 5, Angle advance amount = 10
STEP1 Speed = 10, Angle advance amount = 20
Angle advance amount (digit)
20
S1
10
S0
0510
Rotation speed (r/min)
To Next Page
Loading...
