EasyManua.ls Logo

Mitsubishi Electric MELSEC iQ-F Series - Page 68

Mitsubishi Electric MELSEC iQ-F Series
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66
5 Replacement from FX3U to FX5U
5.3 Selection of Substitute Models
Extension I/O FX2N-48ER-D FX5-32ER/DS+FX5-16ER/ES
FX2N-48ER-DS FX5-32ER/DS+FX5-16ER/ES
FX2N-48ET-D FX5-32ET/DS+FX5-16ET/ES
FX2N-48ET-DSS FX5-32ET/DSS+FX5-16ET/ESS
FX2N-48ER-UA1/UL No recommended substitute models
Extension device FX3U-1PSU-5V FX5-1PSU-5V
FX2N-4AD-TC FX5-4AD-TC-ADP The wiring must be replaced from the screw
terminal block to the European terminal block.
FX2N-4AD-PT FX5-4AD-PT-ADP
FX2N-5A FX5-4AD+FX5-4DA The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
FX2N-2AD FX5-4AD The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
FX2N-8AD FX5-8AD The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
FX2N-2LC FX5-4LC The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
FX2N-2DA FX5-4DA The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
FX2N-1HC FX3U-2HC
*1
Replacement of the wiring from the screw terminal
block to the connector is necessary.
FX2N-10PG FX5-20PG-D Replacement is necessary due to the difference of
the connector type.
FX3U-20SSC-H FX5-40SSC-S Replacement is necessary due to the difference of
the connector type for external input connection.
FX2N-232IF No recommended substitute models
FX2N-32CCL FX5-CCL-MS Set to the intelligent device station in the
recommended substitute models.
*2
FX2N-64CL-M No recommended substitute models
FX3U-ENET No recommended substitute models Ethernet port is built into FX5U CPU module.
FX3U-64DP-M FX5-DP-M
FX3U-CAN No recommended substitute models
FX3U-J1939 No recommended substitute models
FX2N-10GM FX5-20PG-P It cannot be used alone.
Replacement is necessary due to the difference of
the connector type.
FX2N-20GM FX5-20PG-P It cannot be used alone.
Replacement is necessary due to the difference of
the connector type.
FX2N-1RM-SET(-E) No recommended substitute models
FX2N-32DP-IF(-D) No recommended substitute models
FX2N-64DNET No recommended substitute models
Expansion board FX3U-232-BD FX5-232-BD
FX3U-485-BD FX5-485-BD
FX3U-422-BD FX5-422-BD-GOT GOT can only be connected to FX5-422-BD-GOT.
FX3U-CNV-BD Not necessary for FX5U CPU module.
FX3U-8AV-BD No recommended substitute models
FX3U-USB-BD No recommended substitute models
Extension device Recommended substitute models Special notes
Device name Model name Model name

Other manuals for Mitsubishi Electric MELSEC iQ-F Series

Related product manuals