Mitsubishi Electric MELSEC-Q Series - Ethernet Setting of Screen Design Software; Overlap Window Setting of Screen Design Software; 4 Simple Motion Module; Start I;O Number of Module

6/35
BCN-P5999-0176-2a
3.3 Ethernet Setting of Screen Design Software
Host
Net No.
Station
Unit Type
IP Address
Port No.
Communication
1
*
1
1
QnUD(P)V/QnUDEH
192.168.3.39
5006
UDP
3.4 Overlap Window Setting of Screen Design Software
[Close the window when switching base screens] of [Detail Setting] for overlap window in [Screen
Switching/Window] is enabled to close the window when switching base screens.
4. SIMPLE MOTION MODULE
4.1 Start I/O Number of Module
The module's start I/O number is set to 0H. For more details about changing the start I/O number, please refer to
"7.1 Changing Start I/O Number".
5. SCREEN SPECIFICATIONS
5.1 Display Language
The language of the text displayed on the screen can be switched between Japanese, English, and Chinese
(Simplified). The text strings in each language are registered in the columns No. 1 to No. 3 in the comment group No.
500 as shown below. When the column No. is set in the language switching device, the language corresponding to
the column No. will appear.
Column No.
Language
1
English
2
Japanese
3
Chinese (Simplified)
5.2 Screen Transition
5.2.1 Screen List/Transition (common)
Window screen W-30001: Alarm Reset
Window screen W-30003: Clock Setting
Window screen W-30002: Language Setting
Base screen
(B-30001 Menu and other base screens)
System Alarm