6 HK-KT SERIES
6.7 Mounting connectors
131
6
2. Starting to lock
Pull the lever. Pulling the lever firmly inserts the plug into the receptacle connector. If the plug is pushed forcefully without
pulling the lever, the components may damage. If the plug is inserted diagonally or twisted hard while being inserted, the plug
may be deformed or come off or the O-ring may be deformed, which may prevent the splash-proof effect. Insert the plug
connector as straight as possible.
3. Finishing locking
Pull the lever properly until it clicks. It can be felt to the touch when the plug connector is properly locked. After pulling the
lever, pull the plug connector lightly to check that the connector is firmly connected.
To Next Page
Loading...
