EasyManua.ls Logo

Mitsubishi Electric MELSERVO-J5 HK Series - Selection Example of Rotary Servo Motor Power Cable

Mitsubishi Electric MELSERVO-J5 HK Series
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
210
10 APPENDIX
10.2 Selection example of rotary servo motor power cable
10.2 Selection example of rotary servo motor power
cable
Selection requirements for the wire size are as follows.
Wiring length: 30 m or less
As some cables do not fit in the optional or recommended cable clamp, select cable clamps applicable to the
cable diameters.
Selection example when using the 600 V grade EP rubber insulated chloroprene sheath cab-tire cable (2PNCT) for rotary
servo motor power (U/V/W) is indicated below.
*1 The wire size for the HK-ST152_G1_ is the same as the HK-172W.
Rotary servo motor Wire size [mm
2
]
HK-ST52W 1.25
HK-ST102W 1.25
HK-ST172W 2
*1
HK-ST202AW 2
HK-ST302W 2
HK-ST202W 2
HK-ST352W 3.5
HK-ST502W 8
HK-ST702W 8
HK-ST524W 1.25
HK-ST1024W 1.25
HK-ST1724W 1.25
HK-ST2024AW 1.25
HK-ST3024W 1.25
HK-ST2024W 1.25
HK-ST3524W 2
HK-ST5024W 3.5
HK-ST7024W 3.5
HK-RT353W 3.5
HK-RT503W 5.5
HK-RT703W 5.5
HK-RT3534W 1.25
HK-RT5034W 2
HK-RT7034W 2

Table of Contents

Related product manuals