Mitsubishi Electric MELSERVO-J5 HK Series - Page 80

78
5 WIRING OPTION
5.2 Motor cable/connector sets
CN2, CN2A, CN2B, and CN2C side connector (1)
The following shows the view from the wiring side. Do not connect anything to the pins that are marked with a diagonal line.
Securely connect the external conductor of the shielded cable to the ground plate and fix it to the connector shell.
Page 99 Shielding CN2, CN2A, CN2B, and CN2C connectors
Receptacle: 36210-0100PL
Shell kit: 36310-3200-008
(3M or equivalent)
Connector set: 54599-1016
(Molex)
Motor-side connector (2)
■Load-side lead/opposite to load-side lead
The following shows the view from the wiring side. Do not connect anything to the pins that are marked with a diagonal line.
Connector set: MT50W-8D/2D4ES-CVL(11.9)
Contact (for motor power supply): MT50E-1820SCFA
Contact (for encoder and electromagnetic brake): MT50D-2224SCFA
(Hirose Electric)
• Load-side lead
4
2
8
6
1
5
10
3
7
9
MRR
LG
P5
MR
P5 MR
MRR
LG
13 79
428610
5
MRR
MR
13
11
9
7
14
12
10
8
5
3
1
6
4
2
LG
P5
B1 B2
WV
EU
Polarity mark
E mark Polarity mark