5
. Navigating through the menu
1. Main menu list
Main menu
Setting items Setting details
Operation Vane•Louver•Vent.
(Lossnay)
Use to set the vane angle.
High power Use to reach the comfortable room temperature quickly.
Comfort Manual Use to fix each vane angle.
vane
angle
Timer Timer On/Off Use to set the operation On/Off times.
timer
*
Clock setting is required.
Auto-Off Use to set the Auto-Off time.
timer
Weekly timer Use to set the weekly operation On/Off times.
OU silent mode Use to set the time periods in which priority is given to quiet
operation of outdoor units over temperature control. Set the
Start/Stop times for each day of the week.
*
Clock setting is required.
Night setback Use to make Night setback settings.
Energy
Restriction
Temp. Use to restrict the preset temperature range.
saving
range
*
1ºC increments
Operation Use to lock selected functions.
locked
Energy Auto Use to get the units to operate at the preset temperature after
performing energy-save operation for a specified time period.saving return
•
Select a desired vane setting from five different settings.
Use to turn ON/OFF the louver.
•
Select a desired setting from “ON” and “OFF.”
Use to set the amount of ventilation.
•
Select a desired setting from “Off,” “Low,” and “High.”
•
Units can be operated in the High-power mode for up to 30 minutes.
•
Time can be set in 5-minute increments.
•
Time can be set to a value from 30 to 240 in 10-minute
increments.
•
Up to eight operation patterns can be set for each day.
•
Two types of weekly schedules can be set.
*
Clock setting is required.
*
Not valid when the On/Off timer is enabled.
*
1ºC increments
•
Select the desired silent level from “Normal,” “Middle,” and
“Quiet.”
•
Select “Yes” to enable the setting, and “No” to disable the setting.
The temperature range and the start/stop times can be set.
*
Clock setting is required.
*
1ºC increments
•
Different temperature ranges can be set for different operation
modes.
•
The locked functions cannot be operated.
•
Time can be set to a value from 30 and 120 in 10-minute
increments.
*
This function will not be valid when the preset temperature ranges
are restricted.
*
1ºC increments
MA
REMOTE
CONTROLLER
5
. NAVIGATING THROUGH THE MAIN MENU [PAR-40MAA]
D-10
MA REMOTE CONTROLLER