Why is my Mitsubishi Electric Air Conditioner outdoor unit emitting water or vapor?
During cooling mode, water may form and drip from the cool pipes and joints. During heating mode, water may form and drip from the heat exchanger. During defrosting mode, water on the heat exchanger evaporates and water vapor may be emitted.
Why does the airflow direction change on my Mitsubishi Electric Air Conditioner?
During heating mode, the vanes automatically move to the horizontal airflow direction when the airflow temperature is low or during defrosting mode.
What to do if my Mitsubishi Electric Air Conditioner doesn't restart immediately?
Wait approximately three minutes before restarting. Operation has stopped to protect the air conditioner.
Why do I hear water flowing or hissing sounds from my Mitsubishi Electric Air Conditioner?
These sounds can be heard when refrigerant is flowing in the air conditioner or when the refrigerant flow is changing.
Why do I hear cracking or creaking sounds from my Mitsubishi Electric Air Conditioner?
These sounds can be heard when parts rub against each due to expansion and contraction from temperature changes.
Why do the vanes on my Mitsubishi Electric Air Conditioner move past the set position when changing airflow direction?
When the airflow direction is changed, the vanes move to the set position after detecting the base position.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | Mr.SLIM PLA-M71EA |
| Category | Heat Pump |
| Language | English |
To Next Page
