To Next PageTo Next PageWhat to do if the trouble is reoccurring and displayed on Mitsubishi Electric Air Conditioner?
If the trouble is reoccurring and displayed, judge what is wrong and take corrective action according to “10-3. Self-diagnosis action table”.
What to do if the trouble is reoccurring and not displayed on Mitsubishi Electric Mr.SLIM PLA-RP35BA Air Conditioner?
Conduct troubleshooting and ascertain the cause of the trouble according to “10-4. Troubleshooting of problems.
What to do if the trouble is not reoccurring and logged on my Mitsubishi Electric Mr.SLIM PLA-RP35BA Air Conditioner?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring and is logged, it may be due to temporary defects such as the activation of protection devices in the refrigerant circuit (including the compressor), poor wiring connections, or electrical noise. Re-check the specific issue, and inspect the installation environment, the amount of refrigerant, the weather conditions when the problem occurred, and the wiring. After completing the service, reset the error code logs and restart the unit. This indicates that there is no abnormality in the electrical components, controller board, remote controller, etc.
What to do if the trouble is not reoccurring and not logged on Mitsubishi Electric Mr.SLIM PLA-RP35BA?
Re-check the abnormal symptom. Conduct trouble shooting and ascertain the cause of the trouble according to “10-4. Troubleshooting of problems. Continue to operate unit for the time being if the cause is not ascertained. There is no abnormality concerning of parts such as electrical component, controller board, remote controller and etc.
What to do if the trouble with my Mitsubishi Electric Air Conditioner is not reoccurring?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring, consider these steps: * Re-check the symptom and inspect the installation environment, refrigerant amount, and weather conditions when the issue occurred, as well as wiring. * Reset error code logs and restart the unit after finishing service. * Note that there may be no abnormality in the electrical components, controller board, remote controller, etc.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | Mr.SLIM PLA-RP35BA |
| Category | Air Conditioner |
| Language | English |
Critical safety measures to follow before performing any service work.
Specific warnings and procedures for using R410A refrigerant.
Step-by-step procedure for diagnosing errors using the remote controller.
Lists error codes related to indoor unit malfunctions and their symptoms.
Lists error codes for outdoor unit issues and related symptoms.
Details abnormal points, causes, and countermeasures for self-diagnosis error codes.
Lists common phenomena and their potential causes and solutions.
Explains how to operate the unit in emergency mode when controllers fail.
Provides methods for testing specific components like sensors and motors.
Steps to remove the air intake grille from the unit.
Instructions for safely removing the main indoor controller board.
Steps to remove temperature sensors from the unit.
