Why does my Mitsubishi Electric Air Conditioner emit white mist?
If your Mitsubishi Electric Air Conditioner emits a white mist or vapor from the indoor unit, it could be due to high indoor temperature and humidity when the operation starts. Also, during defrosting mode, cool airflow may blow down and appear like a mist.
Why can't I set the timer on my Mitsubishi Electric Air Conditioner?
If you cannot set the timer on your Mitsubishi Electric Air Conditioner remote controller, check if the timer settings are invalid. If the timer can be set, or appears in the remote controller display.
Why does my Mitsubishi Electric Air Conditioner turn off by itself?
If your Mitsubishi Electric Air Conditioner stops without pressing the ON/OFF button, check if the off timer is set and press the ON/OFF button to restart operation. If the air conditioner is connected to a central remote controller or if “ ” appears in the remote controller display, consult the concerned people who control the air conditioner.
Why won't my Mitsubishi Electric Air Conditioner turn on after turning it off?
If your Mitsubishi Electric Air Conditioner does not operate when restarting it soon after stopping, wait approximately three minutes.
Why doesn't my Mitsubishi Electric Air Conditioner blow warm air immediately?
If your Mitsubishi Electric Air Conditioner doesn't blow warm air from the indoor unit soon after starting heating operation, it is normal. Warm air does not blow until the indoor unit has sufficiently warmed up.
What to do if my Mitsubishi Electric Air Conditioner stops when the set temperature is reached?
If your Mitsubishi Electric Air Conditioner stops during cooling mode when the set room temperature is reached, for PLA-EA series, the fan will operate at the lowest speed.
Why does my Mitsubishi Electric Air Conditioner stop before reaching set temperature?
If your Mitsubishi Electric Air Conditioner stops during heating mode before reaching the set temperature, it may be due to frost forming on the outdoor unit when the outdoor temperature is low and the humidity is high. The unit will perform a defrosting operation, and normal operation should resume in about 10 minutes.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Heating Capacity | 6.0 kW |
| Power Source | Electric |
| Refrigerant | R32 |
| Coefficient of Performance (Heating) | 4.20 |
| Noise Level (Outdoor Unit) | 50 dB(A) |
| Outdoor Unit Dimensions (HxWxD) | 550 x 800 x 285 mm |
| Indoor Unit Weight | 10 kg |
| Type | Heat Pump |
| Power Supply | 220-240V, 50Hz |
| Series | Mr. Slim |
Important precautions for safe operation and installation to prevent injury or damage.
Identification of key parts of the indoor air conditioning unit.
Overview of the buttons and display on the wired remote controller.
Explanation of various icons displayed on the remote controller screen.
Identification and function of buttons on the wireless remote controller.
Instructions for installing and replacing batteries in the remote controller.
Procedure for starting and stopping the air conditioner operation.
How to choose between Cool, Dry, Fan, Auto, and Heat operation modes.
Guide on adjusting the desired temperature for cooling and heating.
Instructions for selecting the appropriate fan speed for airflow.
How to adjust the vane and louver direction for optimal airflow.
Setting fixed vane angles for specific air outlets.
Configuration of the sensor for detecting occupants and adjusting operation.
Adjusting airflow patterns based on room conditions or occupancy.
Utilizing features like occupancy sensing for energy efficiency.
Adjusting airflow based on season for comfort and efficiency.
How to use the ventilation function with LOSSNAY units.
Programming daily on/off times and temperature settings.
Operating the unit without a functioning remote controller.
Procedures for cleaning air filters and resetting the filter indicator.
Diagnosing and resolving common problems with the air conditioner.
Detailed technical data including power, airflow, and noise levels.
To Next Page
