254
APPX
Appendix 5 How to Check Production Information and Firmware Version
Checking by using CC-Link IE TSN/CC-Link IE Field diagnostics
■Checking by each I/O module
The production information of each I/O module can be checked by following the procedure below.
1. Connect the engineering tool to the CPU module.
2. Start CC-Link IE TSN/CC-Link IE Field diagnostics from the menu.
[Diagnostics] [CC-Link IE TSN/CC-Link IE Field Diagnostics]
3. Right-click the slave station whose production information you want to display, and select "Production Information".
4. The production information appears.
■Checking with the "Station Information List" window
For how to check the production information, refer to the following.
Page 193 Checking station information
To Next Page
Loading...
