Need help?Do you have a question about the Mitsubishi Electric PLK-J Series and is the answer not in the manual?
General| Hook Type | Rotary Hook |
|---|---|
| Stitch Type | Lockstitch |
| Series | PLK-J |
| Lubrication | Automatic |
| Motor Type | Servo motor |
| Air Pressure | 0.5 MPa |
Details on performing stitching and halting operations.
Procedures for reading sewing data from internal memory or USB.
Procedures for writing sewing data to internal memory or USB.
Procedures for erasing sewing data from internal memory or USB.
Detailed explanation of the arrow input screen used for data entry.
Advanced stitching types created by combining basic inputs.
How to adjust settings related to the presser foot, such as material thickness.
Overview of the primary modification capabilities.
Modifying stitches, blocks, and feed data.
Adjusting stitch length and stitching speed.
Adding/deleting code data and adjusting feed angle.
Adjusting digital tension and presser foot settings.
Overview of the primary data conversion capabilities.
Detailed procedures for back tacking, zigzag, scaling, symmetrical, rotation, offset, and multiple conversions.
Detailed descriptions of each function mode.
Combining, editing, deleting, releasing, and reading combination data.
Comprehensive list of error codes, probable causes, and inspections.
List of system messages, their meanings, and sub-message actions.
To Next Page