To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric PUMY-P36NKMU2 and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PUMY-P36NKMU2 |
| Category | Air Conditioner |
| Language | English |
Precautions to prevent injury, death, or unit damage.
Guidelines for safe electrical installation and wiring.
Ensuring safe operation before and during the test run.
Specific safety measures when working with R410A refrigerant.
Maintenance advice for units designed for salt-prone environments.
Considerations for routing refrigerant pipes.
Criteria for choosing an appropriate location for the outdoor unit.
Physical dimensions and measurements of the outdoor unit.
Limitations on connecting indoor units to the outdoor unit.
Requirements for airflow and access for maintenance.
Specific guidance for installing units in windy areas.
Minimum space requirements for installing a single outdoor unit.
Minimum space requirements for installing multiple outdoor units.
Details on concrete base and foundation bolt requirements.
Instructions for securely mounting the outdoor unit.
Critical safety and handling procedures for R410A refrigerant.
Specifications for refrigerant pipe lengths and height differences.
Detailed steps for connecting refrigerant pipes, including flaring.
Guidance on insulating and protecting refrigerant pipes.
Methodology for verifying the integrity of refrigerant pipe connections.
Correct steps to open and close the refrigerant stop valves.
How to calculate and charge additional refrigerant for extended piping.
Connecting the drain socket or pan for the outdoor unit.
Important safety and compliance notes for electrical installation.
Details on connecting wires to the outdoor unit's control box.
Types, diameters, and lengths for transmission cables.
Wiring methods for group operation systems.
Wiring diagrams and capacity requirements for the main power supply.
Essential checks before initiating the test run.
Procedures for conducting test runs via remote controller or unit switch.
Step-by-step guide for collecting refrigerant from the system.
Details on connectors for control, auto-changeover, and silent mode.
