To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric PUMY-P300YBM-ER.TH and is the answer not in the manual?
General| Model | PUMY-P300YBM-ER.TH |
|---|---|
| Cooling Capacity | 30.0 kW |
| Heating Capacity | 33.5 kW |
| Refrigerant | R410A |
| Dimensions (Outdoor Unit) | 1338 x 1050 x 330 mm |
| Type | Outdoor Unit |
| Power Supply | 380-415V, 50Hz |
Details precautions for handling new refrigerants like R410A, emphasizing proper tools and practices.
Presents detailed specifications for the outdoor units, covering capacity, power, temperature ranges, and dimensions.
Provides detailed outlines and dimensions for the outdoor unit, including service space and piping/wiring directions.
Details procedures and checks to be performed before conducting a test run of the unit.
Provides countermeasures for errors detected during test runs, including self-diagnosis functions.
Provides methods and resistance values for checking various components like thermistors and solenoid valves.
Details resistance characteristics for low, medium, and high-temperature thermistors.
Details the refrigerant piping system, including permissible lengths and kit selection.
Outlines precautions against refrigerant leakage, including R410A concentration limits and confirmation procedures.
Provides a step-by-step guide with photos for disassembling the outdoor unit components.
Explains the functions and operations of the remote controller interface and buttons.
Explains how to check and reset error information displayed on the remote controller.
Guides on accessing and using the Service menu, including password entry and navigation.
Details the procedure for performing test runs on the unit using various remote controller models.
Explains how to set various functions like M-NET address, function numbers, and operational settings.
Describes how to view and delete error history records from the remote controller.
Guides on performing self-diagnosis for the unit using the remote controller.
Explains how to diagnose issues with the remote controller itself using its built-in check function.
