To Next Page
F
fitzgeraldnicoleAug 31, 2025
What to do if Mitsubishi Electric PURY-P216 shows logic error?
- SSarah StoneAug 31, 2025
If your Mitsubishi Electric Air Conditioner is showing a logic error, reset the logic board and check the configurations.
What to do if Mitsubishi Electric PURY-P216 shows logic error?
If your Mitsubishi Electric Air Conditioner is showing a logic error, reset the logic board and check the configurations.
How to fix open phase in Mitsubishi Electric PURY-P216 Air Conditioner?
If your Mitsubishi Electric Air Conditioner shows an open phase, check the phase connections and rewire as necessary.
How to fix communication error between device and transmission processors in Mitsubishi Electric PURY-P216?
To resolve a communication error between the device and transmission processors in your Mitsubishi Electric Air Conditioner, check the wiring connections and replace any damaged cables.
How to fix temperature sensor fault in Mitsubishi Electric Air Conditioner?
If there is a temperature sensor fault in your Mitsubishi Electric Air Conditioner, replace the faulty temperature sensors.
How to fix RPM error/motor error in Mitsubishi Electric Air Conditioner?
If you are getting an RPM error or motor error on your Mitsubishi Electric Air Conditioner, check the motor operation. Replace the motor if it is faulty.
How to fix heatsink overheat protection in Mitsubishi Electric PURY-P216 Air Conditioner?
If your Mitsubishi Electric Air Conditioner is experiencing heatsink overheat protection, check the cooling systems and make sure there is adequate airflow.
What to do if Mitsubishi Electric Air Conditioner has overload protection?
If your Mitsubishi Electric Air Conditioner is experiencing overload protection issues, assess the load conditions and reduce the load if necessary.
General| Model | PURY-P216 |
|---|---|
| Series | PURY |
| Category | Air Conditioner |
| Manufacturer | Mitsubishi Electric |
| Heating Capacity | 68.0 kW |
| Refrigerant | R410A |
| Sound Pressure Level (Outdoor) | 63 dB(A) |
| Max Height Difference | 50 m |
| Type | Outdoor Unit |
| Power Supply | 400V 3Ph 50Hz |
