To Next PageTo Next PageWhat to do if the trouble is reoccurring on my Mitsubishi Electric PUZ-SM100VKA2.TH Air Conditioner?
If the trouble is reoccurring on your Mitsubishi Electric Air Conditioner, judge the problem and take a corrective action according to “9-3. SELF-DIAGNOSIS ACTION TABLE”. Conduct troubleshooting and ascertain the cause of the trouble according to “9-4. TROUBLESHOOTING OF PROBLEMS”.
What to do if the trouble is not reoccurring on my Mitsubishi Electric PUZ-SM100VKA2.TH Air Conditioner?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring, consider temporary defects such as the work of protection devices in the refrigerant circuit including compressor, poor connection of wiring, or noise. Re-check the symptom, and check the installation environment, refrigerant amount, weather when the trouble occurred, and matters related to wiring. Reset check code logs and restart the unit after finishing service. If all else fails, there is no abnormality in electrical component, controller board, remote controller, etc.
What to do if the trouble is not logged on my Mitsubishi Electric Air Conditioner?
If the trouble is not logged on your Mitsubishi Electric Air Conditioner, re-check the abnormal symptom. Conduct troubleshooting and ascertain the cause of the trouble according to “9-4. TROUBLESHOOTING OF PROBLEMS”. If the cause is not ascertained, continue to operate unit for the time being. If all else fails, there is no abnormality concerning of parts such as electrical component, controller board, remote controller, etc.
General| Cooling Capacity | 10.0 kW |
|---|---|
| Heating Capacity | 11.2 kW |
| Refrigerant | R32 |
| Power Supply | 50Hz |
| Series | Mr. Slim |
| Capacity (BTU) | 34120 BTU |
Specific safety measures and warnings for handling R32 refrigerant.
General safety guidelines for units using R32 refrigerant.
General troubleshooting, self-diagnosis, and pre-test run checks.
Table detailing causes and actions for detected abnormalities.
Solutions for common operational phenomena and problems.
Procedures for checking thermistors, fan motors, solenoid valves, and compressor motors.
Guidelines and procedures for emergency operation and its release.
Diagrams showing test points on circuit boards for diagnostics.
Explains the function of switches, connectors, and jumpers on the unit.
Procedure for removing the fan motor.
Steps for removing the compressor unit.
How to check and interpret error codes displayed on the remote controller.
How to view and delete error history records.
Performing self-diagnosis using the PAR-41MAA remote controller.
Performing self-diagnosis using the PAR-SL97A-E remote controller.
Performing self-diagnosis using the PAR-SL100A-E remote controller.
Procedure to check the functionality of the remote controller.
