Mitsubishi Electric Q06UDVCPU - Appendix 2 List of Special Relay Areas

452
CF60
H
iQ Sensor
Solution related
error
The backup processing does not start when the
iQ Sensor Solution function (data backup) is
executed.
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• Reset the CPU module and devices supporting
iQ Sensor Solution, and execute the function
again.
• If the same error code is displayed again even
after the above actions are taken, please consult
the manufacturer of the device supporting iQ
Sensor Solution.
QnUDV
LCPU
CF61
H
iQ Sensor
Solution related
error
The backup processing does not start when the
iQ Sensor Solution function (data backup) is
executed.
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• Reset the CPU module and devices supporting
iQ Sensor Solution, and execute the function
again.
• If the same error code is displayed again even
after the above actions are taken, please consult
the manufacturer of the device supporting iQ
Sensor Solution.
QnUDV
LCPU
CF62
H
iQ Sensor
Solution related
error
The backup processing does not stop after the
iQ Sensor Solution function (data backup) is
executed.
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• Reset the CPU module and devices supporting
iQ Sensor Solution, and execute the function
again.
• If the same error code is displayed again even
after the above actions are taken, please consult
the manufacturer of the device supporting iQ
Sensor Solution.
QnUDV
LCPU
CF63
H
iQ Sensor
Solution related
error
When the restoration of the iQ Sensor Solution
function (data backup/restoration) is performed,
the backup source device and the restoration
target device do not match.
• Check the manufacturers, models, and versions
of the specified backup source device
supporting iQ Sensor Solution and the
restoration target device supporting iQ Sensor
Solution.
QnUDV
LCPU
CF64
H
iQ Sensor
Solution related
error
The restoration processing does not start when
the iQ Sensor Solution function (data restoration)
is executed.
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• Reset the CPU module and devices supporting
iQ Sensor Solution, and execute the function
again.
• If the same error code is displayed again even
after the above actions are taken, please consult
the manufacturer of the device supporting iQ
Sensor Solution.
QnUDV
LCPU
CF65
H
iQ Sensor
Solution related
error
The restoration processing does not stop when
the iQ Sensor Solution function (data restoration)
is executed.
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• Reset the CPU module and devices supporting
iQ Sensor Solution, and execute the function
again.
• If the same error code is displayed again even
after the above actions are taken, please consult
the manufacturer of the device supporting iQ
Sensor Solution.
QnUDV
LCPU
CF70
H
iQ Sensor
Solution related
error
An error has occurred on the Ethernet
communication route.
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• Check the connection status of each Ethernet
cable and the hub.
QnUDV
LCPU
CF71
H
iQ Sensor
Solution related
error
Timeout error
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• The line may be busy. Execute the function after
a while.
QnUDV
LCPU
Error code
(Hexadecimal)
Error item Error details Corrective action
Corresponding
CPU