To Next PageTo Next PageWhy is my Mitsubishi Electric TRANE CITY MULTI TPKFYP KM142 emitting water or vapor from the outdoor unit?
During cooling mode, water may form and drip from the cool pipes and joints of your Mitsubishi Electric Air Conditioner. During heating mode, water may form and drip from the heat exchanger. During defrosting mode, water on the heat exchanger evaporates and water vapor may be emitted.
Why does my Mitsubishi Electric TRANE CITY MULTI TPKFYP KM142 Air Conditioner make a hissing sound?
These sounds from your Mitsubishi Electric Air Conditioner are normal and occur when refrigerant is flowing or when the refrigerant flow is changing.
Why does my Mitsubishi Electric TRANE CITY MULTI TPKFYP KM142 Air Conditioner stop by itself?
If your Mitsubishi Electric Air Conditioner shuts off unexpectedly, check if the off timer is set and press the ON/OFF button to restart it. If the air conditioner is connected to a central remote controller or the “ ” symbol is displayed, consult the relevant personnel who control the air conditioner.
Why does my Mitsubishi Electric TRANE CITY MULTI TPKFYP KM142 turn on by itself?
If your Mitsubishi Electric Air Conditioner turns on by itself, check if the on timer is set and press the ON/OFF button to stop operation. If connected to a central remote controller or the “ ” symbol appears on the remote, consult the relevant personnel who manage the air conditioner. Also, check if the auto recovery feature from power failures has been enabled, and if so, press the ON/OFF button to stop operation.
What to do if Mitsubishi Electric TRANE CITY MULTI TPKFYP KM142 Air Conditioner does not operate even though the ON/OFF button is pressed?
Check if the power switch of the indoor unit of your Mitsubishi Electric Air Conditioner is turned off. If so, turn it on.
How to turn on operation indicator on Mitsubishi Electric Air Conditioner?
Turn on the power switch of your Mitsubishi Electric Air Conditioner.
Why is my Mitsubishi Electric Air Conditioner remote controller display not working?
If the wireless remote controller display for your Mitsubishi Electric Air Conditioner is blank or faint, or if signals aren't being received unless you're very close, the batteries are likely low. Replace them and press the Reset button. If nothing appears even after replacing the batteries, ensure they are installed correctly, paying attention to the + and – directions.
What to do if an error code appears on Mitsubishi Electric Air Conditioner?
If an error code appears on your Mitsubishi Electric Air Conditioner's remote controller display, the protection devices have been activated to safeguard the air conditioner. Do not attempt to repair it yourself. Immediately turn off the power and consult your dealer.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | TRANE CITY MULTI TPKFYP KM142 Series |
| Category | Air Conditioner |
| Language | English |
