To Next PageTo Next PageWhy does the airflow direction change on my Mitsubishi Electric Air Conditioner?
During cooling mode, the vanes automatically move to the horizontal (down) position after 1 hour when the down (horizontal) airflow direction is selected. During heating mode, the vanes automatically move to the horizontal airflow direction when the airflow temperature is low or during defrosting mode.
Why is my Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 Air Conditioner making a cracking sound?
These sounds can be heard when parts rub against each other due to expansion and contraction from temperature changes in your Mitsubishi Electric Air Conditioner.
Why does my Mitsubishi Electric Air Conditioner smell bad?
The indoor unit draws in air that contains gases produced from the walls, carpeting, and furniture as well as odors trapped in clothing, and then blows this air back into the room.
Why is my Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 emitting mist?
If the indoor temperature and the humidity are high, this condition may occur when operation starts. Also, during defrosting mode, cool airflow may blow down and appear like a mist.
Why is my Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 Air Conditioner leaking water outside?
During cooling mode, water may form and drip from the cool pipes and joints. During heating mode, water may form and drip from the heat exchanger. During defrosting mode, water on the heat exchanger evaporates and water vapor may be emitted.
Why do the vanes move past the set position on my Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 Air Conditioner?
When the airflow direction is changed, the vanes move to the set position after detecting the base position in your Mitsubishi Electric Air Conditioner.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | TRANE CITY MULTI TPLFYP EM140 Series |
| Category | Air Conditioner |
| Language | English |
